飞飞世界论坛

标题: 编辑进入地下城最大等级 [打印本页]

作者: admin    时间: 2016-1-10 03:20
标题: 编辑进入地下城最大等级
因为塞卢斯发布了一个新的worldserver具有较高水平的帽子,我看到很多人私人服务器129和更高的水平,仍然想做敌意的地牢。这不是不可能的130级之后。所以这里是我的指南,最大水平变化。
1。确保你有一个私人服务器具有较高的等级上限130
2。去你的资源文件夹和开拓:partydungeon.lua
地牢的名字:
wi_instance_ominous=敌意地牢(吸血鬼)
wi_instance_ominous_1=诅咒敌意地牢(古代)
wi_instance_dreadfulcave=墓穴的痛苦(吕。135
wi_instance_rustia=荒野
wi_instance_rustia_1=野蛮荒野
3。作为一个例子,我们将提供1~诅咒的敌意水平200,硕士和英雄。所以去这条线:
adddungeon(“wi_instance_ominous_1”)
在你看到这3条线:
代码:
       setclassclass_masterclass_hero
       setlevel1130
       setcooltime(最小(30))的类,可以去:class_master=大师,class_hero=英雄,class_normal=正常
=分阶段进入。
=最大水平进入。
蓝色=你需要的时间等待再一次进入地牢。
如果你想让所有阶层能够进入地牢,改变这一行:setclassclass_heroclass_masterclass_normal
这是很清楚如何删除正常,例如,或添加。
最小水平和最大水平变化最小水平到最低水平,你希望能够进入地下城和最高水平的最高级别能够进入地牢。
冷却时间是时间(分钟)你需要电子等才能进入地下城了。
所以这里是我们必须改变后,一个地牢大师和英雄从1级到200,冷却时间15分钟:
代码:
       setclassclass_masterclass_hero
       setlevel1200
       setcooltime(最小(15))
我希望这有助。
(你也可能想看看墓穴的痛苦,那些地牢有冷却时间360小时的面向对象(或类似))
SinceSerus has released a new WorldServer with a higher level cap, I saw alotprivate servers where people were level 129 and higher, which still wanted todo the Animus dungeon. Which isn't impossible after level 130. So here is myGuide to change that max level.
) i8 h6 ]5 V0 P  C* E
: d! ~+ B/ d8 Q9 }3 J$ ^7 w( w+ K# k  s+ e9 w
1. Make Sure you have a private server with a higher level cap than 130file:///C:/Users/ADMINI~1/AppData/Local/Temp/msohtmlclip1/01/clip_image001.gif
! X5 G5 _7 Z$ H8 I" Z5 |) c+ J( W0 ~) A2 B1 ]; g6 t# D7 s
2. Go to your Resource Folder and open up: PartyDungeon.lua4 d9 Z' @" y0 L4 |

6 ~% l# R! x( w8 {) Y2 ]1 M+ XDungeon Names:- V  j7 V: t  D3 c7 N, ^

5 S6 n9 b7 w, _$ Q" IWI_INSTANCE_OMINOUS = Animus Dungeon (Vampire)
0 P' z9 k4 R5 qWI_INSTANCE_OMINOUS_1 = Cursed Animus Dungeon (Ancient)6 }0 t+ F  V( H, n7 t; N
WI_INSTANCE_DREADFULCAVE = Catacombs of Anguish (Lv. 135)
1 W: Q) ?2 K  nWI_INSTANCE_RUSTIA = The Wilds
: M9 v$ `: o; u- t" ~) I' JWI_INSTANCE_RUSTIA_1 = The Savage Wilds. _2 i9 E; W2 R6 b
4 P' x% d  r& g3 t1 G
3. As an example, we will make Cursed Animus available for level 1 ~ 200, forMaster and Hero. So go to this line:
$ v8 b5 C. F2 s8 W  {, F1 BAddDungeon( "WI_INSTANCE_OMINOUS_1" )! X, I- ^& v0 B  Q0 o% ]
under that you see these 3 lines:
Code:
        SetClass( CLASS_MASTER, CLASS_HERO )
        SetLevel( 1, 130 )
        SetCoolTime( MIN(30) )
* s  `5 q' M9 G6 j
Green = Classes which are able to go in: CLASS_MASTER =Master, CLASS_HERO = Hero, CLASS_NORMAL = Normal' N. p( e3 ~, c( s0 X
Purple = Min. Level to enter.
" N9 d% q8 ^$ o/ ]  ARed =Max. Level to enter.2 V/ G# {6 e. v" u& i: U, L
Blue =The time you need to wait to enter dungeon again.
' c/ D1 B7 j  q* R; j( L4 y
) w$ q" c& n) i8 B. K! g2 k' k6 qIf you want to let all classes be able to enter the dungeon, change this line:SetClass( CLASS_HERO, CLASS_MASTER, CLASS_NORMAL )
. d2 o5 \! n: T2 v1 p3 m' gIt is pretty clear how to remove Normaland Master for example, or add.
  K# W( B3 ?9 b" o' r  @) J1 h1 m' u" |8 M; s4 g2 _% I
The Min. Level and the Max. Level: Change the Min. level to the minimum levelyou want to be able to enter the dungeon and the Max. Level for the highestlevel to be able to enter the dungeon.% I' k5 t4 z! I4 s
! h8 \4 U4 w- ~4 f+ O
The Cooldown time is the time (in minutes) you need te wait before you canenter the dungeon again.
% q/ b5 K  C9 r
. H! ~% \: s4 h$ E5 R: DSo here is what we've got after changing, a Dungeon for Master and heros fromlevel 1 to 200 with a Cooldown time of 15 minutes:
Code:
        SetClass( CLASS_MASTER,CLASS_HERO )
        SetLevel( 1, 200 )
        SetCoolTime( MIN(15) )
, I+ E  ]7 ]* I

! u% l. Q- h) r* F$ e) m9 G6 S+ {9 FI hope this helped.
( T, g) m* l. {' {3 A0 f' D% E, B: N' W& o  R7 x
(You might also want to take a look at the Catacombs of Anguish, that dungeonhas a cooldown time of 360 Hours O.O (or something like that))

. X6 A* J8 I' Q  ^




欢迎光临 飞飞世界论坛 (http://ffwold.com/) Powered by Discuz! X3.2